How To Set Artificial Grass

• Lawn & Garden

How To: Lay Artificial Grass

A lush green lawn that's virtually maintenance complimentary can be yours if you put downwardly this tough all the same lifelike turf.

Photograph: istockphoto.com

Artificial grass made its big debut at the Astro Dome in 1966—hence the term Astroturf—but it'southward come a long way since so. Once considered only for professional sports fields, bogus grass is now a bona fide option for homeowners who want the look of a lush, green lawn without maintenance that provokes headaches.

Artificial grass requires no water or fertilizer, which makes information technology eco-friendly, and in that location's no mowing required either. A lawn of artificial grass can final up to 15 years under heavy traffic, the simply maintenance being an occasional spraying with the garden hose if you have pets (for obvious reasons!).

Professional installation tin cost anywhere from $10 to  $15 per square foot. But laying the turf, which costs between $two and $8 per square pes, on an average-sized yard is a doable projection if you're game for some physical labor.

Check out this tried-and-true technique here for how to lay bogus grass!

Tools & Materials

• Garden spade
• Builder's sand
• Mural rake
• Tamper
• Weed barrier
• Landscaping staples
• Run across full listing «
• Utility knife
• 7-inch galvanized lawn spikes
• Jointing record
• Artificial turf adhesive
• Rubber hammer
• Stiff broom

Step 1

Remove whatsoever current turf you take. Utilize a spade or a sod-cut machine (available to rent for about $100/twenty-four hour period at a home improvement store) to pull it up. If a neighbor or friend can't use it, dispose of the turf co-ordinate to the organic waste material removal rules in your community.

Stride 2

Yous will demand a level base on which to lay your artificial grass. Spread about 1-½ inches of builder's sand in the area to create a level surface, using a landscaping rake to distribute it evenly. Then, compact the sand with a tamper or 2X2 slice of plywood and a rubber hammer until it'southward firm and level.

Step 3

Lay downwardly a weed barrier to reduce the chance of weeds growing upwards through the turf. Whorl information technology out to embrace the area completely, allowing the edges to overlap at whatever joints by several inches, and trim with a utility knife to secure it into place with landscaping staples every three or 4 anxiety.

Need help installing your turf?

Get a pro to practice it for yous! Receive free, no-commitment project estimates from landscape specialists almost y'all.

+

Photo: istockphoto.com

Step 4

Artificial grass has a "grain" to information technology, which means rather than standing straight up, it bends slightly at an bending. For the most natural look, roll it out and then that the blades bend toward your home—making certain that all pieces are laid in the same management.

If using more than than ane ringlet's width of turf, it's best to stagger the finish seams so that they don't line up in a row: They'll be less visible and will wear ameliorate that way.

Trim any edges with a utility knife from the back side, being careful not to cut any of the turf.

Stride five

Artificial turf generally comes in widths of 12 to fifteen anxiety. If the space you're covering is more than the roll's width, you'll need to join pieces together.

To do so, trim the edge of each of the pieces with a utility knife (from the back, being careful not to cut the turf) so that they will run across without overlapping. Then coil the pieces back and lay jointing record underneath where the seam will exist.

Apply artificial turf adhesive to the jointing tape, and lay the two turf pieces together, making sure that the seam matches up together, without overlapping.

Step 6

Smash the bogus grass downwards with 7-inch lawn spikes, using a rubber hammer. Space the nails well-nigh every 4 anxiety. Take care to spread the turf blades out and away from the base of the nail before y'all hammer it in. After nailing, brush the nap upward around the nail to hibernate placement.

Stride 7

Once all the turf is installed, castor the entire lawn with a strong-bristled broom to fluff up turf blades. If whatever sand went wayward during installation, hose the lawn down to remove it.

Find trusted local pros for whatsoever domicile projection

+

Source: https://www.bobvila.com/articles/how-to-lay-artificial-grass/

Share this post